For thick doors (up to 30 mm)
with special profiles
For inset doors
MODEL C93
11.3 mm deep metal cup
110o opening
Possible drilling distance on the door (K):
from 3 to 7 mm
Metal cup drilling size
|
CA: with spring
|
Use these formulas to determine the type of hinge arm, the door drilling "K" and the height of the mounting plate "H" which is necessary to solve each application problem. |
For thick doors (up to 30 mm)
with special profiles
For inset doors
MODEL C93
11.3 mm deep metal cup
110o opening
Possible drilling distance on the door (K):
from 3 to 7 mm
Metal cup drilling size
|
CA: with spring
|
Use these formulas to determine the type of hinge arm, the door drilling "K" and the height of the mounting plate "H" which is necessary to solve each application problem. |
Abbreviations:
H = height of the mounting plate
G = hinge constant: 14 5
K = drilling distance from the edge of
the door to the edge of hole for
hinge cup
D = required door overlay
A = reveal
L = gap between door and carcase
C = the space needed for the door to
open without touching an adjacent
door or carcase side
T = max. door thickness
S = thickness of cabinet side
|
CA: with spring
|
Use these formulas to determine the type of hinge arm, the door drilling "K" and the height of the mounting plate "H" which is necessary to solve each application problem. |
Abbreviations:
H = height of the mounting plate
G = hinge constant: 15 10 6 -4
K = drilling distance from the edge of the door to the edge of hole for hinge cup
D
= required door overlay
A = reveal
L = gap between door and carcase
C = the space needed for the door to open without touching an adjacent door or carcase side
T = max. door thickness
S
= thickness of cabinet side
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Copyrights (C) 2001, Best Profit group Limited, All Rights reserved. |
|
|
Taiwan Office: |
China Office: |
|
web site: www.bphardware.com e-mail: bestbp@hotmail.com |
|
